power operated guillotine machine

“JASWINDER” -A Brand that defines quality

Guillotine Shearing Machine

JASWINDER Guillotine Shears are of modern design, Sturdy and of robust construction in the design of which simplicity has been the key note. All machines are guaranteed to cut their rated capacity in Mild Steel for the full length and to stand upto continous service at this capacity.

The Sideframes, Tables, Blade Beam and Hold down are of close grained Cast Iron designed to eliminate deflection and withstand continous high speed performance at full capacity. The upper blade beam moves in guides on the side members. The hold down Beam is actuiated by the movement of the blade Beam and is adjusted for height by adjusting screws.

Drive is by Vee Belts on to the flywheel pulley and then by gearing on to the main crank shaft. The machine is controlled by a paddle rod running the full length of the machine.

Standard Equipment

One set of Blades (fitted) front rack system Gauge, back adjustable gauge, guards for gears and wheel.
Technical Data of Under Models Approved

Model	Shear Length in Mid Steel	Shear Capacity RPM 14401	H.P. Required in per minute	Models Strokes in per Minute	Weight in Kgs
JUCS - 24	24"	16 SWG	3	40	500
JUCS - 36	36"	16 SWG	3	40	700
JUCSA - 40	40"	16 SWG	3	40	800
JUCSB - 40	40"	10 SWG	3	40	1000
JUCSB - 51	51"	16 SWG	3	40	1000
JUCSB - 51	51"	10 SWG	5	40	1700
JUCS - 60	60"	10 SWG	7.5	35	2000
JUCS - 72	72"	10 SWG	7.5	35	2500
JUCS - 80	80"	10 SWG	10	35	2800
JUCS - 100	100"	10 SWG	10	35	3200

How to Adjust the Blades

When readjusting the blades on our shears to cut different thickness of metal the following clearance between the knives will be found useful and can be put into practice by employing a feeler guage.

Thickness in inches	Clearance Brass	in inches Steel	Thickness in mm	ClearanceBrass	in mm Steel
0.015	-	.0003	0.381	.038	.013
0.032	.0015	.0018	0.813	.050	.046
0.065	.0015	.0025	1.651	.055	.064
0.100	.0030	.0030	2.540	.706	.102
0.125	.0040	.0040	6.350	.140	.178

By following the above Clearance the blades will last their maximium life and no un-neccessary strain will be put on the machine.

The knives are easily reset by means of adjusting screws on the table for that purpose. Adjusting screw should be well tightend after reseting otherwise machine will be damaged.